Home Material Calculator

Gravel calculator

Gravel calculator formula: cubic yards = L × W × depth(ft) ÷ 27, which is the same as length times width in feet times depth in inches, divided by 324. For weight it uses about 1.35 to 1.5 tons per cubic yard. A 12 x 14 ft patio base 4 inches deep needs 2.07 cubic yards before the compaction allowance.

Last updated

Units
Shape

Driveways: 4 to 6 in. Paths: 3 to 4 in. Decorative beds: 2 to 3 in.

Identical areas, beds or holes

Measure each bed, patch or slab on its own. The material, allowance and bag size below apply to all of them.

You need about

Enter your measurements and the depth. The result updates as you type.

Estimate only. Check quantities with your supplier before you buy.

Weights vary by about 10% between yards. If your supplier gives a figure, it replaces ours.

Add a price to estimate cost

Used only in the printed order summary, to compare buying bags with buying in bulk.

Estimates only. Densities, bag yields and ground conditions vary. Check quantities with your supplier, and follow local codes for structural work.

Measure the area

Measure length and width in feet, averaging three or four readings if the width varies. Split odd shapes into rectangles and circles; our guide to measuring irregular areas walks through that. Use the depth after compaction, because loose stone shrinks when it is rolled or tamped.

The formula in plain words

The 324 is 27 cubic feet in a yard times 12 inches in a foot, folded into one number so you can keep depth in inches. To get weight, multiply cubic yards by the tons-per-yard figure for your stone. Most crushed stone and gravel lands between 1.35 and 1.5 tons per cubic yard (about 2,700 to 3,000 lb).

Gravel calculator examples by use

Each line uses the compacted depth, the calculator's default 10% allowance and its typical density (t/yd is tons per cubic yard).

  1. Decorative bed, river rock, 10 x 8 ft at 2 in: 80 sq ft, 0.49 cu yd, 0.54 with 10%, 0.73 tons at 1.35 t/yd. Open this in the calculator
  2. Garden path, pea gravel, 3 x 30 ft at 3 in: 90 sq ft, 0.83 cu yd, 0.92 with 10%, 1.24 tons at 1.35 t/yd, or 50 bags of 0.5 cu ft. Open this in the calculator
  3. Patio or paver base, crusher run, 12 x 14 ft at 4 in: 168 sq ft, 168 x 4 / 324 = 2.07 cubic yards, 2.28 with 10%, 3.19 tons at 1.4 t/yd. Metric: 3.66 x 4.27 m (15.61 m²) at about 10 cm is 1.74 m³ or 2.90 tonnes. Open this in the calculator
  4. Driveway, #57 crushed stone, 12 x 50 ft at 6 in: 600 sq ft, 11.11 cu yd, 12.22 with 10%, 17.11 tons at 1.4 t/yd. One government soil-and-water district guide asks for a minimum of 6 inches. Open this in the calculator

Suppliers quote 10 to 20 percent extra for compacted base stone. Depths on soft soil are in how deep should gravel be.

Types of gravel and how they differ

Pea gravel is small, smooth and rounded. It drains well and feels pleasant underfoot, but the stones roll and never lock together, so it suits paths, play areas and beds, not slopes or a driveway base.

Crushed stone, such as #57, is angular, washed, and roughly 1/2 to 1 inch. The sharp faces interlock, so it stays put and drains freely, which makes it the usual choice for drainage trenches and driveway tops. A stormwater-friendly driveway design from UVM Sea Grant specifies washed, angular crushed stone and says not to use rounded stone.

Crusher run (also sold as crush and run, 3/4 minus, ABC or dense-grade aggregate) is crushed rock mixed with its own fines. It packs into a firm layer for under pavers and slabs, but drains poorly. Names vary by region, so describe what you want to the supplier.

River rock is rounded stone, mostly 1 inch and up, bought for looks and drainage swales.

Bags or bulk

Bags suit a small path or stone that has to go through a gate, and bulk suits a driveway or large base; see bags vs bulk for your own break-even point.

Common mistakes

Leftover stone or dug-out soil? Find a dump that takes it near you.

Densities come from supplier pages, so treat tons as a planning estimate and check the delivery ticket.

Values this calculator uses

Weights are loose, dry, typical figures in US tons (2,000 lb). Your supplier's numbers win if they differ.

ItemValueSource
Crushed stone (#57)1.4 tons / cu yd (range 1.2 to 1.5)engineerfix.com, earthstonerock.com, blog.harborsoils.com; confidence: low
Pea gravel1.35 tons / cu yd (range 1.25 to 1.6)skynursery.com, earthstonerock.com, stonecenters.com; confidence: medium
River rock1.35 tons / cu yd (range 1.2 to 1.5)earthstonerock.com, skynursery.com, rosevillerocksupply.com; confidence: medium
Crusher run / base gravel1.4 tons / cu yd (range 1.25 to 1.5)skynursery.com, blog.harborsoils.com, engineerfix.com; confidence: low
Sand1.35 tons / cu yd (range 1.1 to 1.5)stonecenters.com, skynursery.com, blog.harborsoils.com; confidence: medium
0.5 cu ft bag0.5 cu ftsakrete.com, skynursery.com, travis-tx.tamu.edu
0.75 cu ft bag0.75 cu ftsakrete.com, skynursery.com, travis-tx.tamu.edu

Sources

Questions

How many tons of gravel are in a cubic yard?

Most crushed gravel and stone comes out between 1.35 and 1.5 tons a cubic yard, so 1.4 is a safe planning figure. Pea gravel is reported from 1.25 to 1.6 depending on the supplier. To go the other way, one ton fills about 0.7 of a cubic yard.

How many square feet does a ton of gravel cover?

At 1.4 tons per yard, a ton fills about 19.3 cubic feet. Spread over an area, that gives roughly:

  • 116 sq ft at 2 inches deep
  • 77 sq ft at 3 inches
  • 58 sq ft at 4 inches
  • 39 sq ft at 6 inches

These assume the figures are for the finished layer, so shave 10 to 15 percent off the coverage if the stone will be compacted.

How much does a cubic yard of gravel weigh?

Between about 2,500 and 3,200 lb. Suppliers give 2,500 to 2,700 for pea gravel and drain rock, 2,700 to 3,000 for crushed gravel, and the heavier end for washed gravel.

Can a pickup truck carry a yard of gravel?

Usually not in one trip. One supplier puts a half-ton pickup's payload at about 1,500 to 2,000 lb, and a yard of crushed rock is 2,700 to 3,000 lb. Check your door-jamb payload sticker, and load only what it permits. See bags vs bulk for the cost of delivery.

How many bags of gravel make a cubic yard?

It depends on the bag. A yard is 27 cubic feet, so you need:

  • 54 bags of 0.5 cubic foot
  • 36 bags of 0.75 cubic foot
  • 27 bags of 1 cubic foot

Sakrete's 0.5 cubic foot all-purpose gravel covers 3 sq ft at 2 inches deep. Bagged stone also weighs a lot: some suppliers sell 0.75 cubic foot bags that weigh 65 lb or more.